- LED STRIPS: 2x Switchback
- WARRANTY: 1 Year
- SYSTEM INPUT: +/- 12V
- CONNECTIONS: Bare wire (heat shrink butt connectors included)
- HEADLIGHTS: Any surfaces in length range (do not cut)
- OTHER USES: Can be used externally
- PRIMARY FUNCTION: White/Amber Switchback
- SECONDARY: OK as dedicated white/amber
- LIGHT SOURCE: 3014 SMD LED
- LUMINOUS FLUX: 6000LM
- EXPECTED LIFESPAN: 50,000 hours
- WIDTH: 8mm
- THICKNESS: 4mm
- DRIVER PROTECTION: Full internal Potting
- COLOR WHEN OFF: Neutral White
SPARKSMITH: The automotive aftermarket’s latest innovator in LED Lighting and when it comes to Switchback LED Strips; easily the one that gets our nod of approval. Their Switchbacks are perfection so satisfying that we're left without anything else to ask for.
SWITCHBACK: These strips are designed to run full-time in their bright white setting, and [when signaled to do so by your turn signal circuit] flash amber. When the signal stops, they will automatically return to white – just like any modern luxury car would. They can also be wired for use as a bright Amber-only or White-only strip if that's what you want. Just wire up the appropriate input(s) and you're ready to roll!
INTENSITY AND UNIFORMITY: The waterproof silicone jacket is responsible for their neutral "white when off" look and their amazing intensity. The jacket ensures perfect uniformity without any hot/dark spots, bumps, runs, or other imperfections found on coated strips found elsewhere.
SUPER AMBER: You get the best of both worlds. A switchback strip with an insanely bright amber turn signal, and also one that can work reliably as a full-time amber strip!
SIMPLICITY: Wiring the strips is super easy. Their advanced LED drivers control all of the functions and only require a 3-wire input. The red wire receives a constant 12V+. The black wire is grounded, and the orange wire is tapped into the turn signal circuit.
RELIABILITY: The 3014SMD LED chips deliver a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs; they are considerably more reliable between hot/cold cycles compared to "new" COB based strips. The drivers are refined to work reliably on all modern cars/trucks, and are completely waterproofed inside to avoid moisture-related problems.
FLEXIBILITY: Built on a ribbon-based circuit board that's got a side profile of less than one millimeter thick and backed with 3M adhesive. The Pivot strips are not only the most flexible LED strips on the market, but they can be mounted in tight spaces too. Finally you can forget about those bulky, unattractive silicone switchback strips for good. NOTE: These can flex side-to-side AND front-to-back.
Perfect lights for my side by side. Super flexible and crazy bright. My buddy seen mine and ordered a set for his new buggy.