828-508-0917

3157: Morimoto X-VF LED Bulbs

$45.00
  • Availability: In Stock

WHAT'S INCLUDED BULBS: 2x 3157 Morimoto X-VF LED WARRANTY: 2 Years SWAG: Morimoto Decal   COMPATIBILITY CROSS-COMPATIBILITY: 3157, 3057, 3155, 3156, 3357, 3457, 4057, 4157 FITMENTS: Signal, Marker, Brake, Tail, Reverse Lights CIRCUITS: CK or Non-CK Compatible BLINKER CIRCUITS: Should Use Resistors   TECH SPECS COLOR RATING: 5500K (white) INTENSITY: 500lm raw (white) DRIVER OUTPUT: 220-300mA LIGHT SOURCE: CREE XB-D... Read More

WHAT'S INCLUDED

  • BULBS: 2x 3157 Morimoto X-VF LED
  • WARRANTY: 2 Years
  • SWAG: Morimoto Decal

 

COMPATIBILITY

  • CROSS-COMPATIBILITY: 3157, 3057, 3155, 3156, 3357, 3457, 4057, 4157
  • FITMENTS: Signal, Marker, Brake, Tail, Reverse Lights
  • CIRCUITS: CK or Non-CK Compatible
  • BLINKER CIRCUITS: Should Use Resistors

 

TECH SPECS

  • COLOR RATING: 5500K (white)
  • INTENSITY: 500lm raw (white)
  • DRIVER OUTPUT: 220-300mA
  • LIGHT SOURCE: CREE XB-D

 

MORIMOTO: Has always been our go-to-guys when it came to HID, and when they released their line of LED products, we had our doubts. Performance left a little to be desired compared to some of the more refined models on the market. BUT (and thats a big BUT) that has since changed with the new X-VF (Virtual Filament) bulbs! While in all-honesty Morimoto didn't exactly nail it the first time around with the XB LED bulbs, what we have from them today is about as modern as it gets and much more in-line with the quality and performance we've all come to expect from the brand.

INSTANT: Beautiful, bright light. Nearly infinite life span. Great for signal, marker, brake, and tail lights. Morimoto's new X-VF 3157 LED bulbs are an instant upgrade in the looks and performance for the lighting on your car from bumper to bumper.

SO WHAT'S NEW WITH VERSION TWO? Whereas the now discontinued XB bulbs were really only designed to "look cool" and be "bright" - we all know the saying "power is nothing without control" and that was really the focus behind the new X-VF bulbs. They utilize far more refined optics that distribute light in every direction, most notably improving the side and rear-ward spread. What that means for you? By making full use of all the facets in any turn/brake signal housing - They're way brighter! (and they still look cool!)

FADE-ON-FUNCTION: Morimoto's new fade-on function drivers are pretty unique too compared to any other bulbs on the market. Utilized on the switchback version of the XV-F bulbs, the drivers gradually ramp up the intensity of the white when it kicks back on after the amber signal is turned off. A small detail, but a neat one none the less.

MAKE CONTACT: Thin wire contacts? CK? Non CK? All of that is so 2015! To ensure perfect contact at the base of the bulbs, Morimoto has spec'd fat boy (aka wide) contacts - which are much less likely to bend out of the way or break off. In addition, there is now NO NEED to worry whether you have a CK or Non-CK circuit - since the drivers are now universal. We think that in and of itself is an amazing convenience.

FORD AND TOYOTA VEHICLES: There is known issues with how the factory wiring functions using the X-VF switchback bulbs. Because of these known issues, we cannot recommend them for Ford or Tacoma / Tundra vehicles at this time.

CAN-BUS: The X-VF LED bulbs are can-bus friendly and should not cause "lamp out" errors in MOST applications. If however your vehicle requires more resistance, we recommend using the Morimoto HD Load Resistors which will instantly and safely resolve any issues there.

PROTECTED: Heat management is crucial for reliability when it comes to LEDs. Using just six LED chips to produce peak output, the X-VF LED generates less heat compared to other bulbs that sometimes use up to 48 chips. The CREE XB-D LEDs are mounted inside the lens, which sits atop a ribbed aluminum heat sink. Inside; an integrated thermal resistor reduces output as a secondary level of protection.

CREE LEDS: For more info on what's inside, you can download the CREE Data sheet on the emitters that Morimoto uses in the X-VF LED bulbs.

For a FREE custom international shipping quote contact us:

828-508-0917

sparksmith.auto@gmail.com

  • BULBS: 2x 3157 Morimoto X-VF LED
  • WARRANTY: 2 Years
  • CROSS-COMPATIBILITY: 3157, 3057, 3155, 3156, 3357, 3457, 4057, 4157
  • FITMENTS: Signal, Marker, Brake, Tail, Reverse Lights
  • CIRCUITS: CK or Non-CK Compatible
  • BLINKER CIRCUITS: Should Use Resistors
  • COLOR RATING: 5500K (white)
  • INTENSITY: 500lm raw (white)
  • DRIVER OUTPUT: 220-300mA
  • LIGHT SOURCE: CREE XB-D