- PROJECTORS: 2x Morimoto Mini D2S 4.0, Round Lens
- SHROUDS: SOLD SEPARATELY (Find Compatible Shrouds Here)
- HID BALLASTS: 2x Morimoto XB35 D2S or XB55 D2S
- HID BULBS: 2x Morimoto XB
- WIRE HARNESS: 1x Your Preference
- HOUSING SEALANT: 1x Morimoto RetroRubber (Available in black or gray)
- OPTIONAL LED HALOS: 2x Profile Pivot
- WARRANTY:5 Years (35w) or 3 Years (50w)
- APPLICATIONS: Universal / Size Allowing
- CAPABILITIES: Both Low & High Beam
- PROJECTOR WIDTH: 88mm
- PROJECTOR HEIGHT: 73mm
- PROJECTOR DEPTH: 138mm
- PROJECTOR LENS: 3.0 Inches (or 2.25" x 2.75" square lens)
- MOUNTING SHAFT: 35mm diameter (H4 direct fit)
- MINIMUM HOUSING DEPTH: 117mm
- WIRE HARNESS: Match your original bulb size
- SHROUDS: All styles except "Mini" models
- LED HALOS: Varies according to shroud style
- CERTIFICATIONS: Exceeds DOT requirements
- OPERATING RANGE: -40C to +125C
- XB BALLAST INPUT: 9-32VDC
- XB BALLAST OUTPUT: 85VAC 35/50W
- XB BALLAST MAX V: 25kV (at start-up)
- XB35 BALLAST LIFESPAN: 2500 Hours
- XB55 BALLAST LIFESPAN: 2000 Hours
- 3000K BULBS: Golden Yellow (~2800 lm)
- 4500K BULBS: Warm White (~3500 lm)
- 5500K BULBS: Pure White (~3400 lm)
- 6500K BULBS: Cool White (~3200 lm)
- XB55 50W BALLASTS: (+20% intensity) (-1000K color)
ONE TWO THREE: Four! Truth be told, for a bunch of headlight nerds: We could not imagine a more perfect projector. The all-new Morimoto Mini D2S 4.0 Bi-xenon takes the cake in every category. A supreme low beam. A High beam so bright it's unholy. A cutoff line that can't get any sharper. Quality that nobody can question, and an undeniable ease of installation. If we died and went to headlight heaven, this thing would be greeting us at the gate.
LEGENDARY: When Morimoto's Mini D2S 3.0 came out in 2013, it changed the game. When the Mini H1 7.0 launched in 2015, it changed the game. The Mini D2S 4.0 carries on the tradition – and why? Not only does it make the 3.0 look like an old dinosaur...but because it's powered by D2S bulbs; it's capable of taking the awesome optics developed for the H1 7.0 to a whole new level.
OUTPUT: We'll just start with the hotspot. It's brighter than any bi-xenon projector we've tested...in fact, it's so bright that it exceeds the maximum amount of intensity allowed by DOT even at 35W. (because #regulations) The beam pattern is extremely wide and flat, with none of the bowing found on the 3.0...all thanks to the beauty in the center of this beast: it's curved cutoff shield. The Kuria Optic clear lens helps produce plenty of color flicker, but also a razor sharp cutoff line that eliminates all glare to oncoming traffic. Last but not least, the high beam. Shaped by the secondary cutoff shield, there's plenty of light reserved for use here to penetrate for hundreds of meters at night.
PHYSICALLY SPEAKING: Output isn't the only thing the 4.0 gets praise for. It's clear they've paid a lot of attention to the physical attributes too. The threaded shaft is longer than before, making it easier to install, and it's threads are silky smooth (near impossible to strip). The bi-xenon solenoid mechanism has next to no slack, and thankfully this time, the solenoid input actually plug into the back of the projector. The black lens holder gets the cool “4” cut out too! OEM Quality, aftermarket performance. We like it!
EASY TO INSTALL: Picking out a projector always meant striking a balance between a) how much light output you wanted, and 2) how much time and effort you were willing to afford to get it done. The Morimoto Mini D2S 4.0 sacrifices nothing in the light output department while remaining amazingly easy to install. Unfortunately for big ass bi-xenon projectors like the Acura TL, Murano, or FX-R; there's really no reason to cut, trim, and JB Weld the hell out of everything just to achieve output nirvana, and it probably wont be long until they find a new home in our closeout category.
INSTALLATION SUMMARY: On a H4-based headlight reflector for example...Remove the headlight lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tighten the lock ring, and re-seal the headlights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it! Check out the installation procedure linked above.